Erdco Vietnam: 2016

Thứ Năm, 16 tháng 6, 2016

20 Series Turbo-Flotm Probe_Erdco Vietnam_STC Vietnam

20 Series Turbo-Flo^tm Probe

Here is the precision of a turbine meter with insertion meter ease of use. The low mass non-metallic turbine rotates in direct proportion to fluid velocity and can provide local flow rate and total information with no external power required. 4-20 mA signal outputs are also available for control and automation functions.

The Series 20 probe features 304 stainless steel probe and fitting construction with insertion length for 1.5 to 72 inch pipe sizes. This product is typically installed through 1.25/1.5 inch pipe tees, saddles or threaded spuds - all standard pipe fittings. Very popular method of installation is through a 1.5 inch port ball valve which provides for easy installation and removal.

A full compliment of instrumentation for indication of flow rate, totalization and control function is available. Make Turbo-Flo^tm your flow measurement solution for water-based liquids.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
20	Turbine probe	Water (aqueous solutions)	Flow rate Totalize flow	Insertion design Use for large pipe sizes Survey or flow profile	304 sst	1000 psig	225ºF	1-1/2" to 72"

25 Series Turbo-Flotm Probe_Erdco Vietnam_STC Vietnam

25 Series Turbo-Flo^tm Probe

The 25 Series range offers high performance non-metallic materials of construction like DuPont Delrin® and PVC that are also more economical than stainless steel. Delrin is a particularly good choice for water applications and due to its high natural lubricity, it resists coating from organics and mineral salts. We recommend PVC construction for use in PVC piping systems.

Probe lengths for use in up to 10 inch diameter pipe sizes are available. A full compliment of instrumentation for indication of flow rate, totalization and control functions are available.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
25	Turbine probe	Water (aqueous solutions)	Flow rate Totalize flow	Non-metallic Lowest cost Insertion design Xmttrs available	Delrin or PVC	145 psig @ 75ºF	225ºF (Delrin) 140ºF (PVC)	1-1/2" to 10"

HP-302 Open Stream Velocity Meter_Erdco Vietnam_STC Vietnam

HP-302 Open Stream Velocity Meter

The HP-302 is a hand held turbine meter intended for field use. The turbine, when immersed in a flowing stream, rotates at a speed in direct linear proportion to the fluid velocity. A pulse signal is produced with each rotation of the turbine.

The patented design of the turbine and shroud offer unique capabilities. In combination, turbine and shroud are highly directional, enabling detection of stream patterns as well as measurement of velocity. By adjustment of a pivot, the turbine may be rotated over 90 degrees for a vertical velocity measurement and insertion into pipe discharge ends. Small size permits measurement of streams as shallow as 1.5 inches. In addition to the 3 foot probe, extensions may be used for an overall reach of 21 feet enabling sewer surveys from street level.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
HP-302	Hand held open stream velocity probe	Streams& Rivers, Outfalls Quench tanks	Velocity measurement Find flow direction	Hand held probe Turbine head swivels Measure ft/s Up to 21 ft extensions	Anodized aluminum	N/A	140ºF	N/A

25 Series Turbo-Flotm Probe_Erdco Vietnam_STC Vietnam

25 Series Turbo-Flo^tm Probe

Probe lengths for use in up to 10 inch diameter pipe sizes are available. A full compliment of instrumentation for indication of flow rate, totalization and control functions are available.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
25	Turbine probe	Water (aqueous solutions)	Flow rate Totalize flow	Non-metallic Lowest cost Insertion design Xmttrs available	Delrin or PVC	145 psig @ 75ºF	225ºF (Delrin) 140ºF (PVC)	1-1/2" to 10"

22 Series Turbo-Flotm Probe_Erdco Vietnam_STC Vietnam

22 Series Turbo-Flo^tm Probe

Here is an easy to install insertion meter with turbine meter accuracy. The low mass non-metallic turbine rotates in direct proportion to fluid velocity and can provide local flow rate and total information with no external power required. 4-20 mA signal outputs are also available for control and automation functions.

The 22 Series probe has its own integral screw jack mechanism for "hot tap" insertion through a 1.5 inch full port ball valve at pressures up to 400 psig. By rotating the crank handle at the top of the probe, the turbine is lowered through the open ball valve into the stream. What an improvement over the "tighten down nuts on three threaded rods in rotation" method!

This instrument is ideal for periodic sampling or permanent installation. It is often used as a flow prover for other metering devices in large line sizes.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
22	Hot tap turbine probe	Water (aqueous solutions)	Flow rate Totalize flow	Screw jack mechanism Use for large pipe sizes Survey or flow profile	304 sst	400 psig	225ºF	1-1/2" to 72"

3400 Armor-Flotm meters_Erdco Vientam_STC Vietnam

3400 Armor-Flo^tm meters

Measure liquid, gas or steam flow rates in horizontal or vertical pipelines. Armor-Flo^tm meters handle more aggressive fluids that cannot be measured with See-Flo® due to clarity, pressure or where process also requires limit switches or signal transmission.

Rare earth cobalt magnets are used to couple the flow isolated indicator with the vane. There are no shaft connections or stuffing boxes. The internal wedge shape of the Armor-Flo^tmhousing is designed for self-cleaning. These features emphasize simplicity and reduce maintenance.

Each flowmeter is calibrated to be direct reading for a liquid or gas at it's operating conditions. The large indicator and dial are easy to read. Scales with special engineering units and dual units of measure are available.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
3400	Flow rate meter	Liquids, gases or steam	Direct reading flow rate	General purpose meter Opaque fluids OK Calibrated for application conditions	Aluminum, brass, 316 sst or (Haste alloy 1/2-1")	200 psig1/2 - 12" 400 psig1/2 - 6" 1000 psig 1/2 - 1"	400ºF 400ºF rating requires epm or viton o-ring	1/2"- 12"

3500 Armor-Flotm meter with Limit Switch_Erdco Vietnam_STC Vietnam

3500 Armor-Flo^tm meter with Limit Switch

In addition to the performance benefits of the 3400 Series flow rate meter, the 3500 Series Armor-Flo^tm includes switching capabilities. Adjustable flow switches provide positive indication of flow/no flow conditions or may be positioned to establish process limits. In either application the switch captures the indicator preventing movement until the flow rate is within the acceptable range.

The glass encapsulated reed switches are SPDT rated at 0.25 amperes at 120vac (1.5 amperes at 24vdc). This switch is appropriate for use in Class I, Division 2 areas.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
3500	Flow rate meter with lo/hi limit switches	Liquids, gases or steam	Direct reading flow rate Lo/Hi switches	Meter w/ adjustable switches Opaque fluids OK Calibrated for application conditions	Aluminum, brass, 316 sst or (Haste alloy 1/2-1")	200 psig1/2 - 12" 400 psig1/2 - 6" 1000 psig 1/2 - 1"	400ºF 400ºF rating requires epm or viton o-ring	1/2"- 12"

3700 Armor-Flotm meter with NEMA-7 Enclosure_Erdco Vietnam_STC Vietnam

3700 Armor-Flo^tm meter with NEMA-7 Enclosure

Transmit a signal or actuate limit switches in hazardous areas with the 3700 Series Armor-Flo^tm meter. The cover housing is listed by Underwriters Laboratories as an enclosure for metering equipment in hazardous areas. It contains an easy to read calibrated scale and the signal output or switch circuitry. These devices are magnetically coupled with the flow sensor. This results in complete isolation from the fluid stream.

Six signal and switch options are available:

4-20 mA two wire transmitter
4-20 mA transmitter and frequency output
4-20 mA transmitter with 2 adjustable setpoints
Low flow limit switch
High flow limit switch
Low and high flow limit switches

All instruments are calibrated to the liquid or gas flow conditions that you specify. A wide range of connection types, engineering units, signal options and sizes are available.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
3700	Flow rate meter with transmitter/ switches for hazardous areas Div1, Group C&D	Liquids or gases (steam with switch only)	Direct reading flow rate 4-20 mA output Frequency output Lo/Hi switches	XP meter w/ signal output or switches Opaque fluids OK Calibrated for application conditions	316 sst	200 psig1/2 - 12" 400 psig1/2 - 12"	185ºF with transmitter 400º with switch (requires epm or viton o-ring)	1/2"- 12"

3600 Armor-Flotm meter with Signal Output_Erdco Vietnam_STC Vietnam

3600 Armor-Flo^tm meter with Signal Output

Here is a combination of signal transmission with independent mechanical local flow rate indication. Should your 24vdc loop go down, you will still be able to take flow rate readings at the meter.

The output signal is linear within the middle 80% of the range and well suited for tracking utility applications. A response curve is furnished with each flowmeter. Transmitter signal options include:

4-20 mA two wire loop powered
4-20 mA with concurrent 0-1000Hz frequency output
4-20 mA with two adjustable set points

Applications include valve modulation, remote metering, sub-metering, blending and totalizing. Use with ERDCO accessory displays for remote indication or totalizing.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
3600	Flow rate meter with transmitter	Liquids or gases	Direct reading flow rate 4-20mA output Frequency output	General purpose meter Opaque fluids OK Calibrated for application conditions	Aluminum, brass, 316 sst or (Haste alloy 1/2-1")	200 psig1/2 - 12" 400 psig1/2 - 6" 1000 psig 1/2 - 1"	400ºF 400ºF rating requires epm or viton o-ring	1/2"- 12"

3100 See-Flo® Indicator_Erdco Vientnam_STC Vietnam

3100 See-Flo® Indicator

See-Flo® indicators show you at a glance, the color, clarity and flow of liquids in process lines. An alloy vane indicator is flexed in proportion to flow through the variable area indicator housing. The large tempered glass window permits easy observation of fluid conditions and vane indicator position for a wide range of liquids in vertical or horizontal piping runs.

The wedge shape of the indicator housing makes the See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the window is easily removed and replaced. As it is intended to be used as a flow indicator, the scale is not calibrated in this model.

A special write-on surface is provided along the sweep of the indicator on which system reference points may be marked. This can help you establish normal operating limits, rate efficiency or balance a process system.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
3100	Flow Indicator	Transparent Liquids	Vane moves w/ flow (not calibrated) Observe fluid condition	Write-on scale No power required	Aluminum, brass or 316 sst	200 psig	400ºF 400ºF rating requires epm or viton o-ring	1/2"- 12"

3200 See-Flo® Indicator_Erdco Vietnam_STC Vietnam

3200 See-Flo® Indicator

See-Flo® meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs.

The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced. Because of its large internal cavities this product will not plug up like the old glass tube "rotameters".

Each flowmeter is calibrated to be direct reading for the liquid or gas operating conditions that you specify. Scales with special engineering units and dual units of measure are available.

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
3200	Flow Indicator	Transparent Liquids or gases	Direct reading flow rate Observe fluid condition	Lowest cost meter No power required Calibrated for application conditions	Aluminum, brass or 316 sst	200 psig	400ºF 400ºF rating requires epm or viton o-ring	1/2"- 12"

Turbo-Flotm Selection Guide_Erdco Vietnam_STC Vientam

Turbo-Flo^tm Selection Guide

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
20	Turbine probe	Water (aqueous solutions)	Flow rate Totalize flow	Insertion design Use for large pipe sizes Survey or flow profile	304 sst	1000 psig	225ºF	1-1/2" to 72"
22	Hot tap turbine probe	Water (aqueous solutions)	Flow rate Totalize flow	Screw jack mechanism Use for large pipe sizes Survey or flow profile	304 sst	400 psig	225ºF	1-1/2" to 72"
25	Turbine probe	Water (aqueous solutions)	Flow rate Totalize flow	Non-metallic Lowest cost Insertion design Xmttrs available	Delrin or PVC	145 psig @ 75ºF	225ºF (Delrin) 140ºF (PVC)	1-1/2" to 10"
HP-302	Hand held open stream velocity probe	Streams& Rivers, Outfalls Quench tanks	Velocity measurement Find flow direction	Hand held probe Turbine head swivels Measure ft/s Up to 21 ft extensions	Anodized aluminum	N/A	140ºF	N/A

Armor-Flotm Selection Guide_Erdco Vietnam_STC Vietnam

Armor-Flo^tm Selection Guide

Series	Description	Applications	Functions	Features	Materials	Pressure Limits	Temperature Limits	Pipe Sizes
3400	Flow rate meter	Liquids, gases or steam	Direct reading flow rate	General purpose meter Opaque fluids OK Calibrated for application conditions	Aluminum, brass, 316 sst or (Haste alloy 1/2-1")	200 psig1/2 - 12" 400 psig1/2 - 6" 1000 psig 1/2 - 1"	400ºF 400ºF rating requires epm or viton o-ring	1/2"- 12"
3500	Flow rate meter with lo/hi limit switches	Liquids, gases or steam	Direct reading flow rate Lo/Hi switches	Meter w/ adjustable switches Opaque fluids OK Calibrated for application conditions	Aluminum, brass, 316 sst or (Haste alloy 1/2-1")	200 psig1/2 - 12" 400 psig1/2 - 6" 1000 psig 1/2 - 1"	400ºF 400ºF rating requires epm or viton o-ring	1/2"- 12"
3600	Flow rate meter with transmitter	Liquids or gases	Direct reading flow rate 4-20mA output Frequency output	General purpose meter Opaque fluids OK Calibrated for application conditions	Aluminum, brass, 316 sst or (Haste alloy 1/2-1")	200 psig1/2 - 12" 400 psig1/2 - 6" 1000 psig 1/2 - 1"	185ºF	1/2"- 12"
3700	Flow rate meter with transmitter/ switches for hazardous areas Div1, Group C&D	Liquids or gases (steam w/ switch only)	Direct reading flow rate 4-20 mA output Frequency output Lo/Hi switches	XP meter w/ signal output or switches Opaque fluids OK Calibrated for application conditions	316 sst	200 psig1/2 - 12" 400 psig1/2 - 12"	185ºF with transmitter 400º with switch & epm or viton o-ring	1/2"- 12"